01Product detail
How this system works
A meat drying room is a walk-in chamber rather than a cabinet: product hangs or sits on racks, and low-temperature dehumidified air is circulated across the whole room. Working at a moderate temperature keeps fat from rendering and gives jerky, sausage and dried beef a consistent texture through the batch.
The heat pump sits outside the chamber, the room is built from insulated sandwich panels and the door seals against the frame. Temperature, humidity and air change are set from the control cabinet and can be held for a multi-day cycle. Room volume, rack count and loading are quoted against the daily input weight.
Models, power and dimensions
| Model | Heating capacity | Dehumidification | Rated power | Rated current | Airflow | Weight | Dimensions L×W×H |
|---|---|---|---|---|---|---|---|
| DY-18YH (6HP) | 18 kW | 18 L/h | 5.2 kW | 9.8 A | 7,200 m³/h | 325 kg | 1600 × 1100 × 1300 mm |
| DY-36YH (12HP) | 36 kW | 36 L/h | 11.5 kW | 21.6 A | 14,400 m³/h | 360 kg | 2000 × 1400 × 1500 mm |
| DY-45YH (15HP) | 45 kW | 45 L/h | 15.4 kW | 28.9 A | 18,000 m³/h | 450 kg | 2000 × 1400 × 1500 mm |
| DY-60YH (20HP) | 60 kW | 60 L/h | 18.4 kW | 34.6 A | 24,000 m³/h | 610 kg | 2300 × 1800 × 1600 mm |
| DY-75YH (25HP) | 75 kW | 75 L/h | 22.8 kW | 42.9 A | 28,800 m³/h | 650 kg | 2300 × 1800 × 1600 mm |
| DY-90YH (30HP) | 90 kW | 85 L/h | 25.5 kW | 48 A | 30,000 m³/h | 750 kg | 2580 × 1600 × 1830 mm |
Every model: 380 V / 50 Hz, R22 or R134a, 35-75 °C drying, 5-45 °C ambient. The matched split outdoor unit is sized with the model.
Model: DY-18YH (6HP)
Heating capacity: 18 kW
Dehumidification: 18 L/H
Rated power: 5.2 kW
Rated current: 9.8 A
Standard airflow: 7,200 m3/h
Weight: 325 kg
Dimensions: 1600 x 1100 x 1300 mm
Room load: 850 kg per batch
Refrigerant: R22 / R134a
Power supply: 380 V / 50 Hz
Drying temperature: 35-75 C
Ambient temperature: 5-45 C
Cured meat drying programme
- Preheat to 45-50 C at 50-55 % RH before loading
- Constant-speed stage: reach 58-63 C within 2 hours of loading, hold 5-6 hours
- Deceleration stage: 15-18 hours with automatic dehumidification and heat recovery
- Colour development: 4-6 hours at 50-54 C and 45 % RH
- Finish with ventilation cooling, humid-air exhaust and cold-air drying
- Heating capacity
- 18 kW
- Power supply
- 380 V / 50 Hz
- Dimensions
- 1600 x 1100 x 1300 mm
Built for installation
- Rails or racks run the length of the room, so product hangs or stacks instead of sitting in one layer.
- The room is assembled on site from insulated sandwich panels around a sealed door frame.
- Condensate drains away outside the room, and the interior is lined so it can be washed down between runs.
- Heat pump and control cabinet sit outside the chamber, which keeps service access out of the drying space.
